Handleiding
Je bekijkt pagina 16 van 20
16
ERROR SIGNAL CONNECTION
16
Remove
Cap
Close
Cover
Wire
The unit will output an Error signal (normal open dry contact) when an "Error" has occurred,
to show what the failure is on the unit.
1. Remove the 'Cap' on the 'Fire Alarm Cover'.
2. Use recommended error signal wire size from 16 AWG to 26 AWG for a solid wire,
or 16 AWG to 22 AWG for a stranded wire with ring terminal for #5 stud size.
3. Connect the end of the error signal wire to ER1 and ER2, and the other end to the compatible
with variaus warning devices such as alarm speaker, light indicators, and etc.
Output
Error
Signal
Terminal
ER1
WARNING DEVICE
WARNING
INDICATOR
ER2
ERROR SIGNAL OUTPUT NORMAL CONDITION
ER1 ER1
ER2 ER2
CLOSED OPEN
● Output terminal ER1 and ER2
● Connecting Error Signal with warning device
ERROR SIGNAL CONNECTION
Bekijk gratis de handleiding van Airrex HSC-18P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airrex |
| Model | HSC-18P |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2014 MB |
