Handleiding
Je bekijkt pagina 52 van 56
52
TROUBLESHOOTING
TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables contain possible
causes and notes for resolving an error message or malfunction. It is recommended to read the tables
carefully below in order to save your time and money that may cost for calling to the service center.
1. The hob is equipped with a self diagnostic function. With this test the technician is able to check the
function of several components without disassembling or dismounting the hob from the working surface.
2. Failure code occur during customer using & Solution;
Type de problème Causes possibles Actions à effectuer
The cooktop cannot be
turned on.
No power.
Make sure the ceramic hob is connected
to the power supply and that it is
switched on. Check whether there is
a power outage in your home or area.
If you’ve checked everything and
the problem persists, call a qualified
technician.
The touch controls are
unresponsive.
The controls are locked.
Unlock the controls. See section ‘Using
your ceramic cooktop’ for instructions.
The touch controls are di-
cult to operate.
There may be a slight film
of water over the controls or
you may be using the tip of
your finger when touching the
controls.
Make sure the touch control area is dry
and use the ball of your finger when
touching the controls.
The glass is being
scratched.
Rough-edged cookware.
Unsuitable, abrasive scourer or
cleaning products being used.
Use cookware with flat and smooth
bases. See ‘Choosing the right
cookware’. See ‘Care and cleaning’.
Some pans make crackling
or clicking noises.
This may be caused by the
construction of your cookware
(layers of dierent metals
vibrating dierently).
This is normal for cookware and
does not indicate a fault.
Failure code Problem Solution
E0
Zero error.
Reinsert the connection between the display board
and the power board. Replace the power board.
E1
Ceramic plate temperature
sensor failure--open circuit.
Check the connection or replace the ceramic plate
temperature sensor.
E2
Ceramic plate temperature
sensor failure- -short circuit.
E7
Ceramic plate temperature
sensor failure
Failure Display,Hints and Tips
Bekijk gratis de handleiding van Airlux ATH32T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlux |
| Model | ATH32T |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 3644 MB |
Caratteristiche Prodotto
| Apparaatplaatsing | Ingebouwd |
| Soort bediening | Touch |
| Kleur van het product | Zwart |
| Ingebouwd display | Ja |
| Timer | Ja |