Airlive XPON ONU-1GE handleiding
Handleiding
Je bekijkt pagina 7 van 37
AirLive 2.5GE XPON ONU & XPON ONU-1GE User Manual
Page 4
Indication Panel 2.5GE XPON ONU
Figure 1-4: Indication panel
LED
Mark
Status
Description
System
SYS
On / Off
System is not running or fatal error.
Blink
Normal running.
Registration
PON
On
The device is registered to the PON system.
Off
The device is not registered to the PON system.
Blink
The device is registering.
Optical signal
loss
LOS
Blink
Device does not receive optical signal.
Off
Device receives optical signal.
LAN
LAN1
LAN2
On
Port is connected properly.
Off
Port connection exception or not connected.
Blink
Port is sending or/and receiving data.
Interface/Button panel XPON ONU-1GE
1 2 3 4
Figure 1-3: Interface/Button panel
Name
Function
1: PON
Connect to OLT by SC type fiber connector, single mode optical fiber cable.
2: LAN
Connect PC or other devices with Ethernet port by Cat5 cable, RJ-45 connector.
3: DC 12V
Connect with power adapter. DC 12V, 0.5A.
4: RST
Press RST button over 10 seconds, ONU restores factory default and reboot.
Bekijk gratis de handleiding van Airlive XPON ONU-1GE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | XPON ONU-1GE |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4425 MB |
