Airlive VH-4GW handleiding
Handleiding
Je bekijkt pagina 86 van 192
4. Web Management
AirLive VH-4GW User Manual
82
RIP
: Routing Information Protocol (RIP) will exchange information about destinations
for computing routes throughout the network. Please select RIP v2 only if you have
different subnets in your network. Otherwise, please select RIP v1 if you need this
protocol
4.1.6.2.2 OSPF
OSPF is an interior gateway protocol that routes Internet Protocol(IP) packets solely
within a single routing domain(autonomous system). It gathers link state information
from available routers and constructs a topology map of the network. The topology
determines the routing table presented to the Internet Layer which makes routing
decisions based solely on the destination IP address found in IP packets.
You can enable the OSPF routing function by click on the “Enable” button for OSPF
item. There are 8 area subnets can be defined in the OSPF network and enable them
individually. When you finished setting, click on
“Save”
to store your settings. Above
settings are just for examples.
4.1.6.2.3 BGP
Border Gateway Protocol(BGP) is the protocol backing the core routing decisions on
the Internet. It maintains a table of IP networks or 'prefixes' which designate network
reach-ability among autonomous systems(AS). It is described as a path vector protocol.
BGP does not use traditional Interior Gateway Protocol (IGP) metrics, but makes
routing decisions based on path, network policies and/or rule-sets. For this reason, it is
more appropriately termed a reach-ability protocol rather than routing protocol.
Bekijk gratis de handleiding van Airlive VH-4GW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | VH-4GW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33811 MB |
