Airlive VH-4GW handleiding
Handleiding
Je bekijkt pagina 74 van 192
4. Web Management
AirLive VH-4GW User Manual
70
1.
Operation Band:
Select the WiFi operation band that you want to configure.
But the device supports only 2.4G single WiFi band.
2.
Regulatory Domain
: Indicate number of WiFi channel. It depends on
regional government regulations.
3.
Beacon interval
: Beacons are broadcast packets that are sent by a wireless
AP/router. The main purpose of beacon packet is let wireless clients know
this AP (SSID) when doing wireless network scan.
4.
DTIM interval
: A DTIM is a countdown informing clients of the next window
for listening to broadcast and multicast messages. When the wireless router
has buffered broadcast or multicast messages for associated clients, it sends
the next DTIM with a DTIM Interval value.
5.
RTS Threshold:
If an excessive number of wireless packet collision
occurred, the wireless performance will be affected. It can be improved by
adjusting the RTS/CTS (Request to Send/Clear to Send) threshold value.
6.
Fragmentation
: Wireless frames can be divided into smaller units(fragments)
to improve performance in the presence of RF interference and at the limits
of RF coverage.
7.
WMM Capable:
WMM can help control latency and jitter when transmitting
multimedia content over a wireless connection.
8.
Short GI:
Time setting of Guard Interval between two Wi-Fi packets.
Decrease this time interval will increase Wi-Fi data throughput. But it may
cause some side-effects when the quality of Wi-Fi signal is not good. 800ns
is the standard time setting of GI.
Bekijk gratis de handleiding van Airlive VH-4GW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | VH-4GW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33811 MB |
