Airlive VH-4GW handleiding
Handleiding
Je bekijkt pagina 66 van 192
4. Web Management
AirLive VH-4GW User Manual
62
4.1.3.1.2 WDS Only Mode
While acting as a wireless bridge, Wireless Repeater 1 and Wireless Repeater 2 can
communicate with each other through wireless interface (with WDS). Thus all stations
can communicate each other.
1.
Wireless Module:
Enable the wireless function.
2.
Wireless Operation Mode
: Choose “WDS Only Mode” from the drop list.
3.
Lazy Mode:
This device support the Lazy Mode to automatically learn the
MAC address of WDS peers, you don’t have to input other peer AP's MAC
address. However, not all the APs can be set to enable the Lazy mode
simultaneously; at least there must be one AP with all the WDS peers’ MAC
address filled.
4.
Green AP:
Enable the Green AP function to reduce the power consumption
when there are no wireless traffics.
5.
Channel:
The radio channel number. The permissible channels depend on
the Regulatory Domain. The factory default setting is auto channels election.
6.
Authentication & Encryption:
You may select one of the following
authentications to secure your wireless network: Open, Shared, Auto,
WPA-PSK and WPA2-PSK.
Bekijk gratis de handleiding van Airlive VH-4GW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | VH-4GW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33811 MB |
