Airlive VH-4GW handleiding
Handleiding
Je bekijkt pagina 63 van 192
4. Web Management
AirLive VH-4GW User Manual
59
1.
Wireless Module:
Enable the wireless function.
2.
Wireless Operation Mode
: Choose “AP Router Mode” from the drop list.
3.
Green AP:
Enable the Green AP function to reduce the power consumption when
there is no wireless traffic. By default, it is disabled.
4.
Multiple AP Names:
This device supports up to 8 SSIDs for you to manage your
wireless network. You can select VAP-1 ~ VAP-8 and configure each wireless
network if it is required.
5.
Time Schedule:
The wireless radio can be turn on according to the schedule rule
you specified. By default, the wireless radio is always turned on when the wireless
module is enabled. If you want to add a new schedule rule, please go to
[System]-[Scheduling]
menu.
6.
Network ID(SSID):
Network ID is used for identifying the Wireless LAN (WLAN).
Client stations can roam freely over this device and other Access Points that have
the same Network ID. (The factory default setting is “default”)
7.
SSID Broadcast:
The router will broadcast beacons that have some information,
including SSID so that wireless clients can know how many AP devices by scanning
the network. Therefore, if this setting is configured as “Disable”, the wireless clients
can’t find the device from beacons.
8.
WLAN Partition:
You can check the WLAN Partition function to separate the
wireless clients. The wireless clients can’t communicate each other, but they can
access the internet and other Ethernet LAN devices.
9.
Channel:
The radio channel number. The permissible channels depend on the
Regulatory Domain. The factory default setting is auto channel selection. It’s
recommended to choose a channel that is not used in your environment to reduce
radio interference.
10.
WiFi System:
This gateway supports 2.4GHz 802.11b/g/n modes, so you can
choose adequate WiFi system from the option list of “802.11b Only”, “802.11g Only”,
“802.11n Only”, “802.11b/g Mixed”, “802.11g/n Mixed” and “802.11b/g/n Mixed”
according to your requirement. The factory default setting is “802.11b/g/n Mixed”.
Bekijk gratis de handleiding van Airlive VH-4GW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | VH-4GW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33811 MB |
