Airlive VH-4GW handleiding
Handleiding
Je bekijkt pagina 45 van 192
4. Web Management
AirLive VH-4GW User Manual
41
PPPoE Account and Password: The account and password your ISP assigned to you.
Please note the account and password is case sensitive. For security concern, the
password you input won’t be displayed on web UI.
Primary DNS/ Secondary DNS: In most cases, ISP will assign DNS server automatically
after PPPoE connection is established. Input the IP address of primary and secondary DNS
server manually if required.
Connection Control: Select your connection control scheme from the drop list:
“Auto-reconnect (Always-on)”, “Dial-on-demand” or “Manually”. If selecting “Auto-reconnect
(Always-on)”, this gateway will start to establish Internet connection automatically since it’s
powered on. It’s recommended to choose this scheme if for mission critical applications to
ensure Internet connection is available all the time. If choosing “Dial-on-demand”, this
gateway won’t start to establish Internet connection until local data is going to be sent to
WAN side. After that, this gateway will disconnect WAN connection if idle time reaches
value of Maximum Idle Time. If choosing “Manually”, this gateway won’t start to establish
WAN connection until you press “Connect” button on web UI. After that, this gateway will
disconnect WAN connection if idle time reaches value of Maximum Idle Time.
Service Name/ Assigned IP Address: ISP may ask you to use a specific service name
when connecting PPPoE connection. In some cases, ISP can also provide you a fixed IP
address with PPPoE connection. For these cases, you need to add that information in this
field.
MTU: Most ISP offers MTU value to users. The default MTU value is 0 (auto).
NAT: By default, it is enabled. If you disable this option, there will be no NAT mechanism
between LAN side and WAN side.
Network Monitoring: You can do preferred settings by using this feature to monitor the
connection status of WAN interface. Checking mechanism depends on several parameters
defined here. The network monitoring provides the WAN interface status and then system
can prevent embedded 3G/LTE modem from some sort of auto-timeout and disconnects
from the Internet after a period of inactivity.
Enable: Check the box to do Network Monitoring.
DNS Query/ICMP Checking: Do the keep alive through DNS query packets or ICMP
packets.
Loading Checking: The response time of replied keep-alive packets may increase when
WAN bandwidth is fully occupied. To avoid keep-alive feature work abnormally, enable this
option will stop sending keep-alive packets when there are continuous incoming and
outgoing data packets passing through WAN connection.
Check Interval: Indicate how often to send keep-alive packet.
Check Timeout: Set allowance of time period to receive response of keep-alive packet. If
this gateway doesn’t receive response within this time period, this gateway will record this
keep alive is failed.
Latency Threshold: Set acceptance of response time. This gateway will record this
keep-alive check is failed if the response time of replied packet is longer than this setting.
Fail Threshold: Times of failed checking. This WAN connection will be recognized as
broken if the times of continuous failed keep-alive checking equals to this value.
Bekijk gratis de handleiding van Airlive VH-4GW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | VH-4GW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33811 MB |
