Airlive VH-4GW handleiding
Handleiding
Je bekijkt pagina 115 van 192
4. Web Management
AirLive VH-4GW User Manual
111
4.
Operation Mode:
Default is “Always on” and other options depend on
product models.
5.
Encapsulation Protocol
: Default is ESP and other options depend on
product models.
6.
Keep-alive:
Check “Enable” box to keep alive the tunnel. By default,
keep-alive
method is “Ping IP” and other options depend on product models. Input the
IP address of remote host that exists in the opposite side of the VPN tunnel
(Ex. You can input the LAN IP address of remote Business Security
Gateway). The Interval is specified with the time interval between two ping
requests, and by default, it is 30 seconds. Now, the device will start to ping
remote host when there is no traffic within the VPN tunnel. If the device can't
get ICMP response from remote host anymore, it will terminate the VPN
tunnel automatically.
4.2.3.2.5 Local & Remote Configuration
1.
Local Subnet:
The subnet of LAN site of local Business Security Gateway.
It can be a host, a partial subnet, or the whole subnet of LAN site of local
gateway. There are 5 entries for Local Subnet.
2.
Local Netmask:
The local netmask and associated local subnet can define
a subnet domain for the local devices connected via the VPN tunnel. There
are 5 entries for Local Netmask.
3.
Full Tunnel:
All traffic from Intranet of Business Security Gateway goes
over the IPSec VPN tunnel if these packets don’t match the Remote Subnet
of other IPSec tunnels. That is, both application data and Internet access
packets land up at the VPN concentrator.
Bekijk gratis de handleiding van Airlive VH-4GW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | VH-4GW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33811 MB |
