Airlive VH-4GW handleiding
Handleiding
Je bekijkt pagina 107 van 192
4. Web Management
AirLive VH-4GW User Manual
103
One “Clear” command button can let you clear all rules and “Restart” command
button can let you restart the operation of all QoS rules.
1.
Add:
After you enabled the rule-based QoS function, you can click on the
“Add” button to create a new QoS rule.
2.
Delete:
After you selected some QoS rules by checking the “Select” box for
each rule, you can click on the “Delete” button to remove those rules from the
list.
3.
Clear:
Delete all existed QoS rules.
4.
Restart:
Press “Restart” button to re-initiate all QoS rules again.
5.
Edit:
Configure the specific QoS rule again.
4.2.2.2.3 QoS Rule Configuration
It supports the adding of one new rule or the editing of one existed rule. There are
some parameters need to be specified in one QoS rule. They are Interface, Group,
Service, Resource, Control Function, QoS Direction, Sharing Method, Time Schedule
and finally, the rule enable.
1.
Interface:
Select the WAN interface for the QoS rule.
2.
Group:
Specify the target client members for the rule by their VLAN ID, MAC
Address, IP Address, Host Name or Group Object. These base categories
depend on product models. Besides, “IP Address” group can be defined as
an IP range with an IP address and its subnet mask. And “Group Object” is
defined in the
System
->
Grouping
menu. But what kinds of groups to use
depend on product models.
Bekijk gratis de handleiding van Airlive VH-4GW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | VH-4GW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33811 MB |
