Airlive POE-GSH2404M handleiding
Handleiding
Je bekijkt pagina 38 van 200
5.8 Storm Control
Storms generated via broadcast, unknown multicast and unicast messages
are prevented as follows. These messages will be suppressed subject to packet rates
respectively. The average rate of the messages received by monitoring interfaces will be
compared with the max threshold configured during an inspection interval. Configured storm
policing will be performed at this interface if the average rate exceeds the max threshold.
When a L2 Ethernet interface receives the broadcast, unknown multicast or unicast
messages, the device will forward them to other L2 interfaces in a same VLAN (Virtual
Local Area Network) if the egress interface cannot be recognized according to destination
MAC addresses. As a result, broadcast storm may occur to degrade device operation
performance.
Three kinds of message flow can be controlled by storm policing characteristics to
stay away from broadcast storms.
Instructions:
1. Click the “Port > Storm Control” in the navigation bar to configure the attributes
related to storm policing such as mode as follows:
2. Select the appropriate port and “Edit” it by configuring the policing rates of
broadcast, unknown multicast and unicast storms at each port.
38
Bekijk gratis de handleiding van Airlive POE-GSH2404M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | POE-GSH2404M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 72641 MB |
