Airlive POE-GSH2404M handleiding
Handleiding
Je bekijkt pagina 32 van 200
2. Click the “Port >Link Aggregation > LACP” in the navigation bar to configure the
LACP attributes such as system priority, port priority and timeout method as follows:
Interface data are as follows
Configuration Items Description
System Priority LACP determines the active and passive modes between two
devices subject to priority standard.
Port Port list
Port Priority
LACP determines the dynamic LAG member mode subject to the
port priority with a superior system.
Timeout It decides the transmission frequency of LACP messages.
Description:
Please make sure there is no member interface accessing the Eth-Trunk before changing its
work pattern, otherwise it fails.
Work pattern of the local network devices should be consistent with that of the opposite
network devices.
Illustration
Ethernet Switch A aggregates 3 ports from GE1 to GE3 to Switch B, in order to share the
load by each member port.
The following configurations are exampled by means of dynamic aggregation.
32
Bekijk gratis de handleiding van Airlive POE-GSH2404M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | POE-GSH2404M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 72641 MB |
