Airlive POE-GSH2404M handleiding
Handleiding
Je bekijkt pagina 165 van 200
Interface data are as follows
Configuration Items Description
ACL Name ACL rule list is made based on IPv6 ACL configuration.
Sequence IPv6 ACL ranges from 1 to 2,147,483,647.
Action
ACL actions are divided into “Permit” or “Deny”, as well as
“Shutdown”.
Protocol It is required to select the protocol type such as ICMP, TCP and
UDP. Select “Any” to represent any protocol.
Source IP Enter the source IP and mask of ACL rules. Select “Any” to
represent any source IP.
Destination IP Enter the destination IP and mask of ACL rules. Select “Any” to
represent any destination IP.
Type of Service Enter the service type of ACL rules, such as DSCP (0-63) and
IP priority (0-7). Select “Any” to represent any service type.
Source Port
Enter the source port of ACL rules, such as single port No. or
range segment (0-65,535). Select “Any” to represent any source
port.
Destination Port Enter the destination port of ACL rules, such as single port No.
or range segment (0-65,535). Select “Any” to represent any
destination port.
TCP Flags Enter the TCP flags of ACL rules, such as URG, ACK, PSH,
RST, SYN, FIN, with the actions such as “Set”, “Unset” and
“Don’t care”.
ICMP Type Enter the ICMP message type of ACL rules. Select “Any” to
represent any ICMP type.
ICMP Code
Enter the ICMP code value of ACL rules. Select “Any” to
represent any field value.
4. “Apply” and finish as follows.
165
Bekijk gratis de handleiding van Airlive POE-GSH2404M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | POE-GSH2404M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 72641 MB |
