Airlive POE-GSH2404M handleiding
Handleiding
Je bekijkt pagina 118 van 200
12.4.1 Property
Global MVR function should be enabled since it is disabled by default.
Instructions:
1. Click the “Multicast > MVR > Property”, enter the MVR global configuration
interface as follows:
Interface data are as follows
Configuration Items Description
State Enable or disable MVR
VLAN VLAN ID to be configured
Mode Compatible: The CPU of MVR switch normally forwards the query
message of router and the join message of client to form the
multicast forwarding table of dynamic learning. However, the CPU
will not forward the join message to the router port, so the upper
router will not receive the following join message, resulting in the
router data cannot be forwarded to the switch normally. In this
mode, it is necessary to configure the router manually Multicast
forwarding table forwards data to switch
Dynamic: The only difference between the dynamic mode and the
compatible mode is that the CPU can forward the join message to
the router port in the dynamic mode, so the upper layer router can
learn the multicast forwarding table dynamically, and there is no
need to manually configure the multicast forwarding table of the
router to forward the data to the switch
Group Start The starting address of the multicast group
Group Count Number of multicast group addresses
Query Time Multicast group query time
118
Bekijk gratis de handleiding van Airlive POE-GSH2404M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | POE-GSH2404M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 72641 MB |
