Airlive POE-GSH1602M handleiding
Handleiding
Je bekijkt pagina 42 van 231
42
5.8 Storm Control
Storms generated via broadcast, unknown multicast and unicast messages are
prevented as follows. These messages will be suppressed subject to packet rates
respectively. The average rate of the messages received by monitoring interfaces will
be compared with the max threshold configured during an inspection interval.
Configured storm policing will be performed at this interface if the average rate exceeds
the max threshold.
When a L2 Ethernet interface receives the broadcast, unknown multicast or unicast
messages, the device will forward them to other L2 interfaces in a same VLAN (Virtual
Local Area Network) if the egress interface cannot be recognized according to
destination MAC addresses. As a result, broadcast storm may occur to degrade device
operation performance.
Three kinds of message flow can becontrolled by storm policing
characteristics to stay away from broadcast storms.
Instructions:
1. Click the “Port > Storm Control” in the navigation bar to configure the attributes
related to storm policing such as mode as follows:
2. Select the appropriate port and “Edit” it by configuring the policing rates of
broadcast, unknown multicast, and unicast storms at each port.
Bekijk gratis de handleiding van Airlive POE-GSH1602M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | POE-GSH1602M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 71337 MB |
