Airlive POE-GSH1602M handleiding
Handleiding
Je bekijkt pagina 37 van 231
37
Description:
Please make sure there is no member interface accessing the Eth-Trunk before
changing its work pattern, otherwise it fails. Work pattern of the local network devices
should be consistent with that of the opposite network devices.
Illustration
Ethernet Switch A aggregates 3 ports from GE1 to GE3 to Switch B, in order to share
the load by each member port.
The following configurations are exampled by means of dynamic aggregation.
.
Description:
The following is the configuration of Switch A only, which should stay the same with
that of Switch B for port aggregation.
Instructions:
1. Click the “Port > Link Aggregation > Group” in the navigation bar, “Edit” with LAG
2, select GE1-GE3 in LACP mode. “Apply” and Finish as follows:
Bekijk gratis de handleiding van Airlive POE-GSH1602M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | POE-GSH1602M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 71337 MB |
