Airlive POE-GSH1602M handleiding
Handleiding
Je bekijkt pagina 31 van 231
31
Link Aggregation Technology bundles multiple physical interfaces into a single logical
interface without upgrading hardware. Its backup mechanism not only improves
reliability, but also shares the flow load on different physical links.
As shown below, Switch A is linked with Switch B through three Ethernet links which
are bundled into an Eth-Trunk logical link. Its bandwidth equals to that of the three links
in total, thus broadening the bandwidth. Meanwhile, these three links back up mutually
to be more reliable.
Link Aggregation can meet the following demands:
⚫ Insufficient bandwidth of two switches connected with one link.
⚫ Insufficient reliability of two switches connected with one link.
Link Aggregation can be divided into Manual Mode and LACP Mode in
accordance with Link Aggregation Control Protocol (LACP) state.
In the first mode, Eth-Trunk establishment, member interface access should be added
manually without LACP. It is also called the Load-sharing Mode because all links are
involved in data forwarding and load sharing. In case any active link fails, LAG will
average load with the remaining ones. This mode is preferred under the circumstance
that two directly connected devices require a larger link bandwidth but has no access
to LACP.
Bekijk gratis de handleiding van Airlive POE-GSH1602M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | POE-GSH1602M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 71337 MB |
