Airlive ONU-10XGS-AX304P-2.5G Handleiding (96 Pagina's)

Handleiding

AirLive ONU-10XG(S)-AX304P-2.5G User Guide

92

Chapter 5 FAQ

1. Q: All indicators are not lit?

A: (1) The indicator LED hasn't come up yet, you need to wait about two minutes.

(2) Power is off or power adapter is bad.

2. Q: Why PON/LOS indicator flashing red?

A: (1) There is no optical signal. Maybe the fiber is broken down or connection

loosened.

(2) Optical power is too low.

(3) The fiber is dusty.

3. Q: LAN indicators are not lit?

A: (1) Indicator LED switch is turned off.

(2) The cable breaks down or connection loosened.

(3) The cable type incorrect or too long.

4. Q: FXS indicators are not lit?

A: (1) Indicator LED switch is turned off.

(2) SIP accounts aren’t registered.

5. Q: PC can’t visit web UI?

A: (1) PC and HGU are not in the same network fragment. By default, LAN IP is

192.168.1.1/24.

(2) The cable breaks down.

(3) IP conflict or have loopback.

6. Q: User can’t surf the Internet normally.

A: (1) PC has set a wrong IP and gateway or network is bad.

(2) There is loopback or attack in network.

(3) Route mode WAN connection doesn’t get an IP or DNS is disabled.

7. Q: Customer can’t use the VoIP service.

A: (1) The phone or the wire is damaged.

(2) SIP accounts aren’t registered.

(3) Dial plan is wrong.

8. Q: HGU stops to work after working for some time.

A: (1) Power supply is not working properly.

(2) The device overheats.

Bekijk gratis de handleiding van Airlive ONU-10XGS-AX304P-2.5G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.