Airlive ONU-10XGS-AX304P-2.5G Handleiding (96 Pagina's)

Handleiding

AirLive ONU-10XG(S)-AX304P-2.5G User Guide

71

2) Enable IGMP snooping

Choose “Application > Multicast Setting > IGMP Snooping Configuration” in

navigation menu. Check down IGMP snooping. IGMP snooping is checked by default. It

will not be mentioned in the rear examples.

Figure 4-2-2: Enable IGMP snooping

3) Add multicast snooping VLAN

Choose “Application > Multicast Setting > IPTV” in navigation menu. Click on

choose the relevant WAN connection and add multicast VLAN, the result is as shown in

the figure.

Figure 4-2-3:Add multicast Snooping VLAN

4) Join multicast group

User sends an IGMP report message through LAN port 2. Report message doesn’t take

any VLAN tag.

4.2.2.2 Route mode for IGMP

1) Add a WAN connection

Choose “Network > WAN > WAN Config” in navigation menu. Add a route mode WAN

connection as the following parameters.

 Mode is Route.

 Protocol mode is IPv4.

 Choose DHCP. (Provided by ISP)

 NAT function is checked.

Bekijk gratis de handleiding van Airlive ONU-10XGS-AX304P-2.5G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.