Airlive ONU-10XG-AX304P-2.5G handleiding
Handleiding
Je bekijkt pagina 8 van 96
AirLive ONU-10XG(S)-AX304P-2.5G User Guide
4
RST
Press RST 6 seconds for reboot, greater than 6 seconds for restoring
user default configuration, greater than 12 seconds for restoring
factory configuration as default.
LAN1-4
The blue LAN1 is a 2.5GE port and the yellow LAN2-4 are 1GE
ports. Connect PC or other devices to GE port by Cat5 cable, RJ-45
connector and connect to 2.5GE port by Cat5e/Cat6/Cat7 cable, RJ-
45 connector.
FXS
Connect to the telephone with FXS port by telephone wire.
Indication Panel
Figure 1-5-2: Indication panel
Name
Status
Function
PON/LOS
OFF
Device not started/Received incorrect optical power
Green
always on
Device has been registered to OLT.
Flash
green
Device registering.
Flash red
Received optical power is lower or stronger than the
sensitivity of the optical receiver.
Red
always on
Device starting up
WAN
On
WAN connection is up.
Off
WAN connection is down.
Blink
Data passing WAN connection.
Bekijk gratis de handleiding van Airlive ONU-10XG-AX304P-2.5G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | ONU-10XG-AX304P-2.5G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11138 MB |
