Airlive ONU-10XG-1001-10G handleiding
Handleiding
Je bekijkt pagina 36 van 36
AirLive ONU-10XG(S)-1001-10G User Guide
33
Chapter 4 FAQ
1. Q: All indicators are not lit?
A: (1) The indicator LED hasn't come up yet, you need to wait about two minutes.
(2) Power is off, or power adapter is bad.
2. Q: Why PON/LOS indicator flashing red?
A: (1) There is no optical signal. Maybe the fiber is broken down or the connection
loosened.
(2) Optical power is too low.
(3) The fiber is dusty.
3. Q: LAN indicators are not lit?
A: (1) Indicator LED switch is turned off.
(2) The cable breaks down or connection loosened.
(3) The cable type incorrect or too long.
4. Q: PC can’t visit web UI?
A: (1) PC and ONU are not in the same network fragment. By default, LAN IP is
192.168.1.1/24.
(2) The cable breaks down.
(3) IP conflict or have loopback.
5. Q: User can’t surf the Internet normally.
A: (1) PC has set a wrong IP and gateway, or network is bad.
(2) There is a loopback or attack in network.
6. Q: ONU stops working after working for some time.
A: (1) Power supply is not working properly.
(2) The device overheats.
Bekijk gratis de handleiding van Airlive ONU-10XG-1001-10G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | ONU-10XG-1001-10G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3726 MB |
