Airlive L3POE-2TX2406 handleiding
Handleiding
Je bekijkt pagina 86 van 201
86
Guard Time
Start the Guard timer when the port detects link recovery, to
prevent unnecessary network oscillation caused by residual
R-APS messages caused by forwarding delay on the ring
network
Work Mode
After the ERPS link returns to normal, it can be determined
whether to re block the RPL owner port by setting the
Revertive/Non Revertive mode of ERPS.
Ring ID
ERPS ring number
Ring Type
0 is the main ring, 1 is the sub ring
Port0
ERPS ring member port, used for the transmission of protocol
and data packets on the ERPS ring
Port1
ERPS ring member port, used for the transmission of protocol
and data packets on the ERPS ring
Port Role
Normal、Owner、neighbour、next-neighbour
Note：
⚫ The ERPS function meets a switching/recovery delay of less than 20ms
11 Discovery
LLDP (Link Layer Discovery Protocol) is defined in IEEE 802.1ab. It is a standard L2
discovery method which integrates the info such as management addresses, device and
interface identifications of local network devices and transmits to the neighbor devices.
After receiving the info, they will save it in form of standard MIB (Management
Information Base) for NMS query and link communication judgment.
It can also integrate the info and transmit to its own remote devices. The info received
by the local network device will be kept in the form of MIB. The following shows how it
works.
Block diagram of LLDP principles
Bekijk gratis de handleiding van Airlive L3POE-2TX2406, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3POE-2TX2406 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29975 MB |
