Airlive L3POE-2TX2406 handleiding
Handleiding
Je bekijkt pagina 34 van 201
34
Port
Port list
Port Priority
LACP determines the dynamic LAG member mode subject to the
port priority with a superior system.
Timeout
It decides the transmission frequency of LACP messages.
Description:
Please make sure there is no member interface accessing the Eth-Trunk before
changing its work pattern, otherwise it fails.
Work pattern of the local network devices should be consistent with that of the
opposite network devices.
Illustration
Ethernet Switch A aggregates 3 ports from GE1 to GE3 to Switch B, in order to share
the load by each member port.
The following configurations are exampled by means of dynamic aggregation.
Description:
The following is the configuration of Switch A only, which should stay the same with
that of Switch B for port aggregation.
Instructions:
1. Click the “Port > Link Aggregation > Group” in the navigation bar, “Edit” with LAG 2,
select GE1-GE3 in LACP mode. “Apply” and finish as follows:
Bekijk gratis de handleiding van Airlive L3POE-2TX2406, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3POE-2TX2406 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29975 MB |
