Airlive L3POE-2TX2406 handleiding
Handleiding
Je bekijkt pagina 32 van 201
32
5.3.2 Port Setting
Attribute configuration of aggregation group member port
1. Click the “Port > Link Aggregation > Port Setting”, to enter the attribute configuration
interface of aggregation group member port as follows:
5.3.3 LACP
LACP (Link Aggregation Control Protocol), based on IEEE 802.3ad Standard,
dynamically aggregates and disaggregates links. It exchanges info with the opposite
network devices through LACPDU (Link Aggregation Control Protocol Data Unit).
After a port uses LACP, it will inform the opposite network device of system priority,
system MAC, port priority and No., and operation Key by transmitting a LACPDU. The
opposite device will compare such info with that saved by other ports after receiving it,
thus reaching an agreement on port participation in or quitting from a dynamic
aggregation.
Dynamic LACP aggregation is automatically created or deleted by system, that is,
internal ports can be added or removed by themselves. Only the ports connected to a
same device with the same rate, duplex, and basic configuration can be aggregated.
Instructions for adding a dynamic link aggregation:
1. Click the “Port > Link Aggregation > Group” in the navigation bar, select the LAG ID
and LACP mode, “Edit” them as follows:
Bekijk gratis de handleiding van Airlive L3POE-2TX2406, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3POE-2TX2406 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29975 MB |
