Airlive L3POE-2TX2406 handleiding
Handleiding
Je bekijkt pagina 28 van 201
28
5.2 Error Disabled
In general, if the software of the switch detects some errors in the port, the port will
be closed immediately. In other words, when the operating system of the switch detects
some error events on the switch port, the switch will automatically close the port
Instructions:
1. Click the “Port > Error Disabled” in the navigation bar to enable or disable configuration
as follows:
5.3 Link Aggregation
Link Aggregation broadens bandwidth and reliability by bundling a group of physical
interfaces into a single logical interface.
LAG (Link Aggregation Group) is a logical link bundled by multiple Ethernet links (Eth-
Trunk).
Ceaselessly expanding network size increases users’ demands of link bandwidth and
reliability. Traditionally, high-speed interface board or the compatible equipment is
usually replaced to optimize bandwidth, which is expensive and inflexible.
Link Aggregation Technology bundles multiple physical interfaces into a single logical
interface without upgrading hardware. Its backup mechanism not only improves reliability,
but also shares the flow load on different physical links.
As shown below, Switch A is linked with Switch B through three Ethernet links which
are bundled into an Eth-Trunk logical link. Its bandwidth equals to that of the three links
in total, thus broadening the bandwidth. Meanwhile, these three links back up mutually
to be more reliable.
Bekijk gratis de handleiding van Airlive L3POE-2TX2406, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3POE-2TX2406 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29975 MB |
