Airlive L3POE-2TX2406 handleiding
Handleiding
Je bekijkt pagina 166 van 201
166
Source IP
Enter the source IP and mask of ACL rules. Select “Any” to
represent any source IP.
Destination IP
Enter the destination IP and mask of ACL rules. Select “Any” to
represent any destination IP.
Type of Service
Enter the service type of ACL rules, such as DSCP (0-63) and IP
priority (0-7). Select “Any” to represent any service type.
Source Port
Enter the source port of ACL rules, such as single port No. or
range segment (0-65,535). Select “Any” to represent any source
port.
Destination Port
Enter the destination port of ACL rules, such as single port No. or
range segment (0-65,535). Select “Any” to represent any
destination port.
TCP Flags
Enter the TCP flags of ACL rules, such as URG, ACK, PSH, RST, SYN,
FIN, with the actions such as “Set”, “Unset” and “Don’t care”.
ICMP Type
Enter the ICMP message type of ACL rules. Select “Any” to
represent any ICMP type.
ICMP Code
Enter the ICMP code value of ACL rules. Select “Any” to represent
any field value.
4. “Apply” and finish as follows.
16.4 ACL Binding
Once the list is created, it must be bound to each required interface.
Instructions:
1. Click the “ACL > ACL Binding” in the navigation bar as follows.
Bekijk gratis de handleiding van Airlive L3POE-2TX2406, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3POE-2TX2406 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29975 MB |
