Airlive L3POE-2TX2406 handleiding
Handleiding
Je bekijkt pagina 128 van 201
128
for IP networks support IP subnet and external routing information marking, also allows
authentication of message and supports IP multicast
OSPF routing protocol is a typical link state routing protocol, which is generally used
in the same routing domain. Here, routing domain refers to an autonomous system (as),
which refers to a group of networks that exchange routing information through a unified
routing policy or routing protocol. In this as, all OSPF routers maintain the same database
describing the as structure, which stores the state information of the corresponding links
in the routing domain. It is through this database that OSPF routers calculate their OSPF
routing tables
As a link state routing protocol, OSPF transmits link state multicast data LSA (link
state advertisement) to all routers in a certain area, which is different from distance vector
routing protocol. The router running distance vector routing protocol passes part or all
of the routing tables to its neighboring routers
As for the security of information exchange, OSPF stipulates that any information
exchange between routers can be authenticated when necessary, so as to ensure that
only trusted routers can transmit routing information. OSPF supports a variety of
authentication mechanisms, and allows different authentication mechanisms to be used
among different regions. OSPF optimizes the application of link state algorithm in
broadcast network (such as Ethernet) in order to make full use of hardware broadcast
ability to transmit link state messages. Usually, in the topology of link state algorithm, a
node represents a router. If all k routers are connected to the Ethernet, when the link
state is broadcast, the packets about these K routers will reach the square of K. Therefore,
OSPF allows a node to represent a broadcast network in the topology diagram. All routers
in each broadcast network send link status messages to report the link status of routers
in the network
Instructions
1. Click on the “Routing > Ospf Routes Management > Ospf Routes Setting” in the
navigation tree as follows.
2. Area Network Setting, click “Add” enter the configuration interface as follows.
Bekijk gratis de handleiding van Airlive L3POE-2TX2406, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3POE-2TX2406 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29975 MB |
