Airlive L3POE-2TX2406 handleiding
Handleiding
Je bekijkt pagina 116 van 201
116
Interface data are as follows.
Configuration Items
Description
State
Enable or disable MVR
VLAN
VLAN ID to be configured
Mode
Compatible: The CPU of MVR switch normally forwards the
query message of router and the join message of client to
form the multicast forwarding table of dynamic learning.
However, the CPU will not forward the join message to the
router port, so the upper router will not receive the following
join message, resulting in the router data cannot be forwarded
to the switch normally. In this mode, it is necessary to
configure the router manually Multicast forwarding table
forwards data to switch
Dynamic: The only difference between the dynamic mode and
the compatible mode is that the CPU can forward the join
message to the router port in the dynamic mode, so the upper
layer router can learn the multicast forwarding table
dynamically, and there is no need to manually configure the
multicast forwarding table of the router to forward the data to
the switch
Group Start
The starting address of the multicast group
Group Count
Number of multicast group addresses
Query Time
Multicast group query time
2. Fill in corresponding configuration items.
Bekijk gratis de handleiding van Airlive L3POE-2TX2406, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3POE-2TX2406 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29975 MB |
