Airlive L3-XGF28 handleiding
Handleiding
Je bekijkt pagina 26 van 190
26
Items
Port
Port list
Description
Port alias
State
Enable or disable port
Speed
Configurable auto negotiation with mandatory 10 Mb, 100 Mb
and 1,000 Mb states. Interface rates including 10 Mbit/s, 100
Mbit/s and 1,000 Mbit/s are available to Ethernet electrical
interfaces and are optional as required.
Duplex
Configurable auto negotiation with full or half duplexes.
Flow Control
After it is enabled on both local network and opposite network
devices, the local one will notify the other to stop transmitting
messages in the presence of network congestion. The opposite
one will execute the command temporarily to ensure zero
message loss.
Disable-Disabled reception and transmission of PAUSE frame;
Enable-Enabled reception and transmission of PAUSE frame;
Auto negotiation-Negotiate PAUSE frame with opposite
network devices automatically.
5.2 Error Disabled
In general, if the software of the switch detects some errors in the port, the port will
be closed immediately. In other words, when the operating system of the switch detects
some error events on the switch port, the switch will automatically close the port
Instructions:
1. Click the “Port > Error Disabled” in the navigation bar to enable or disable
configuration as follows:
Bekijk gratis de handleiding van Airlive L3-XGF28, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3-XGF28 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29079 MB |
