Airlive L3-10XGF12 handleiding
Handleiding
Je bekijkt pagina 32 van 190
32
Configuration
Items
Description
System Priority
LACP determines the active and passive modes between two
devices subject to priority standard.
Port
Port list
Port Priority
LACP determines the dynamic LAG member mode subject to the
port priority with a superior system.
Timeout
It decides the transmission frequency of LACP messages.
Description:
Please make sure there is no member interface accessing the Eth-Trunk before
changing its work pattern, otherwise it fails.
Work pattern of the local network devices should be consistent with that of the
opposite network devices.
Illustration
Ethernet Switch A aggregates 3 ports from GE1 to GE3 to Switch B, in order to
share the load by each member port.
The following configurations are exampled by means of dynamic aggregation.
Description:
The following is the configuration of Switch A only, which should stay the same
with that of Switch B for port aggregation.
Instructions:
1. Click the “Port > Link Aggregation > Group” in the navigation bar, “Edit” with LAG 2,
select GE1-GE3 in LACP mode. “Apply” and finish as follows:
Bekijk gratis de handleiding van Airlive L3-10XGF12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | L3-10XGF12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29079 MB |
