Airlive GPON OLT-121 handleiding
Handleiding
Je bekijkt pagina 13 van 166
AirLive GPON OLT-121 CLI UserGuide
1
1. Access OLT
You can access OLT by CLI (Command Line Interface) via console cable or telnet.
This chapter introduces how to access OLT CLI via console cable.
1. Connect PC serial port or USB-to-Serial port to OLT console port by console
cable.
2. Run secureCRT or other simulation tools such as Putty in the PC, and set
parameters as follows.
➢ Baudrate: 115200
➢ Data bits: 8
➢ Parity: none
➢ Stop bits: 1
➢ Follow control: none
COM port properties
After turned on the power, there is boot information printing. After startup, press enter
and input username and password to login.
Notice: The default account is admin/Xpon@Olt9417#. For example,
Login: admin
Password: Xpon@Olt9417#
gpon-olt> enable
Password: Xpon@Olt9417#
gpon-olt#
Input commands to configure or check device’s status. Input “?” any time you need
Bekijk gratis de handleiding van Airlive GPON OLT-121, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | GPON OLT-121 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15888 MB |
