Airlive AWOD-30AXi handleiding
Handleiding
Je bekijkt pagina 29 van 59
The page includes the following fields:
Object
Description
Wi-Fi Status Select ON (Green) or OFF (Gray) to enable or disable wireless LAN.
SSID
This is the wireless network name. The default SSID is Wireless
2.4G_XXXXXX and Wireless 5.8G_XXXXXX. X is the last 6 numbers of the AP
MAC address.
Hide your SSID
Select ON (Green) or OFF (Gray) to hide wireless LAN or not.
Wireless Mode Select the Wireless mode and Channel bandwidth, “20MHz” or “40MHz” or
“80MHz”.
Channel
Select the operating channel you would like to use. The channel range will
be
changed by selecting a different domain.
Encryption Select the wireless encryption.
Password
Enter your wireless password
Max Station
Set the maximum number of clients that can connect to the CPE
TX-Power
Select the output power of the CPE
VLAN
Set the VLAN-ID for the CPE (between 3~4094)
Wi-Fi Analyzer
Press this button to analyze local area wireless signal.
The page includes the following fields:
Object
Description
Wi-Fi Status
Check mark VAP1~3 to enable them
SSID
This is the wireless network name. The default SSID is Wireless 2.4G
Vap1_XXXXXX and Wireless 5.8G Vap1_XXXXXX. X is the last 6 numbers of
the AP MAC address. The SSID will have Vap2/3 in its name when Vap2 and 3
are enabled
Hide your SSID Select ON (Green) or OFF (Gray) to hide wireless LAN or not.
Encryption Select the wireless encryption. The default is “None”.
VLAN
Set the VLAN-ID for the CPE (between 3~4094)
-26-
Userguide for AirDual-AC12, AWOD-12ACi, AWOD-30AXi
4.6.1
VAP
Select VAP1~VAP3 to enable the virtual AP. Both the 2.4Ghz and 5Ghz have 3 virtual ap’s
Bekijk gratis de handleiding van Airlive AWOD-30AXi, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Airlive |
| Model | AWOD-30AXi |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8876 MB |
