Aiphone JPW-BA handleiding
Handleiding
Je bekijkt pagina 18 van 20
18
■
Settings for the usage of the option outputs
[OPTION OUTPUT]
From th
1
e [INSTALL] menu window, touch
OPTION OUTPUT
.
The [OPTION OUTPUT] window is displayed.
Change the settings by touching the items
2
1
-
3
as
in the table below.
Item Description
1
EVENT
ACTIVATION
Set to "ENABLE" so that it is highlighted
to make this station transfer alarm to the
connected external device.
Also select the action that triggers this station
to transfer the alarm at
3
.
When set to "ENABLE", *
OPTION
is
grayed out and disabled.
Set to "DISABLE" to make this station output
signals when
OPTION
is touched in the
HOME window.
2
DURATION Touch this repeatedly to select the duration
time of outputting signals.
Setting range:
MOMENTARY, 1, 3, 5, 10, 15, 20, 25, 30,
60 sec. (seconds)
3
TRIGGER
EVENT
(When [EVENT ACTIVATION] is set to
"ENABLE" only):
Select the action that triggers this station to
transfer the alarm.
DOOR CALL
...
Receiving a call from a
door station
ROOM CALL
..
Calling a single or all
sub master stations, or
receiving a call from a sub
master station
ALARM ON
.....
Triggering an alarm for
UTILITY or SECURITY
setting
VIDEO OUT
....
Outputting video signals
while receiving a call from,
communicating with, or
monitoring a door station
Procedure:
Touch the preferred action so that it is
highlighted. Up to four actions can be
selected.
When fi nished adjusting the settings, touch
3
ENTER
.
Door release settings
[SET DOOR RELEASE]
Adjust the settings for controlling the door release devices
connected to the "L1" and "L2" terminals.
From th
1
e [INSTALL] menu window, touch
SET DOOR RELEASE
.
The [SET DOOR RELEASE] window is displayed.
Touch
2
LOCK1
to change the settings for "L1".
Set for "L1" and "L2" respectively.
*
Change the settings for "L1" by touching the items
3
1
-
3
as in the table below.
Item Description
1
OUTPUT
METHOD
Touch this, and then select the output
method "N/O" or "N/C" so it is highlighted.
2
REFERENCE
DOOR (for
DOOR1 - 4)
Touch this to change for active (SHOW) or
not (HIDE) to release the door lock for "L1"
when communicating with the door station 1
- 4.
* Adjust the setting for "DOOR1" to
"DOOR4" respectively.
e.g.)
If "DOOR1" is set to "SHOW", when
receiving a call from or monitoring the door
station 1,
1
is displayed on the screen.
Touching it activates the door release device
connected to "L1".
If it is set to "HIDE",
1
is grayed out
and disabled.
3
DOOR
RELEASE
DURATION
Touch this, and then select the desired door
release time so that it is highlighted.
Setting range:
MOMENTARY, 1, 3, 5, 10, 15, 20, 25, 30,
60 sec.
* If this is set to "MOMENTARY", the door
release is activated while
1
is
touched and held.
Adjust "L2" using the same directions as "L1".
4
1
1
2
2
3
3
Bekijk gratis de handleiding van Aiphone JPW-BA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aiphone |
| Model | JPW-BA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2721 MB |
Caratteristiche Prodotto
| Kleur van het product | Grey, White |
| Breedte | 123 mm |
| Diepte | 61 mm |
| Hoogte | 109 mm |
| Aantal per verpakking | 1 stuk(s) |
