Aiphone IXG-DM7-SBAI handleiding
Handleiding
Je bekijkt pagina 20 van 36
- 19 -
5
① Slide the terminal cover left, and open up it.
Cable Clamp
microSD card indicator
Rib
② Insert the option connectors and Cat-5e/6
cable to the station. Run the Cat-5e/6 cable
along the rib. Insert a microSD card into the
microSD card slot if recording function is
used.
• Push the microSD card in until you hear it
click into place.
• The microSD card indicator will light red
while mounting the microSD card.
• To take the microSD card out, push the
[microSD card eject] button (SW2) on the
back of the station one time. The microSD
card indicator will turn off. Do not remove
the card while the indicator is lit. When the
indicator turns off, push the microSD card
until it clicks, then remove.
③ Replace the terminal cover.
Be sure to close the terminal cover when done. If left open, condensation
or water may enter causing damage.
④ With the IXG-DM7-HIDA only, attach the
connectors and Cat-5e/6 cable with a cable
clamp to prevent the wiring from being
pinched between the magnet bracket and
the magnet.
Connect the option connector and Cat-5e/6 cable to the station.
Bekijk gratis de handleiding van Aiphone IXG-DM7-SBAI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Aiphone |
| Model | IXG-DM7-SBAI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3605 MB |
