Aiphone GT-104H handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 27 van 52
- 27 -
1
2
3
4
30°
45°
60°
1
2
3
When mounting on the desktop stand
Screw (for desktop stand) × 4
(included)
Desktop stand
(included)
Leg
Base
Mounting bracket
(comes attached
to the station)
Insulation plate
(included)
Wires
How to connect and remove wires
1. Press the release button (to insert or remove the wire).
2. Insert the wire into the terminal.
1
2
Release button
8 mm
(5/16")
Guard station3-9
When mounting on a wall
<Back wiring>
Mounting bracket
(comes attached to the station)
Mounting height
(box center)
1,500 mm (5')
Wires
Connect the wires to the station
and route them as shown in the
gure.
GT-MKB-N
Mounting screw × 4 (not included)
Screw shaft: Ø4.1 or less
Slotted head: Ø8.2 or less, 3.0mm or less in height
83.5mm (3-5/16")
92mm (3-5/8")
ø30mm
(1-3/16”)
<Surface wiring>
1 Mount the mounting bracket
to the wall.
* When using a gang box, a
3-gang box is recommended.
2 Connect the wires to the
station.
3 Attach the station to the
mounting bracket.
1 Set up the desktop stand.
* Set up the desktop stand on a level surface so that it is stabilized.
Fix the desktop stand in place if needed.
* The desktop stand can be adjusted to 3 angles.
Fit the leg in a groove on the base for the desired angle.
2 Attach the mounting bracket and insulation plate to the
desktop stand.
3 Connect the wires to the station.
4 Attach the station to
the mounting bracket.
NOTE : Keep wiring away from NFC mark, as it may disturb the
audio or video signals.

Bekijk gratis de handleiding van Aiphone GT-104H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAiphone
ModelGT-104H
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9766 MB

Caratteristiche Prodotto

Kleur van het productBeige
MerkcompatibiliteitAiphone
CompatibiliteitGF-4F, GF-4B
Type productFrame