AGM Rattler-C V2 handleiding
Handleiding
Je bekijkt pagina 29 van 36
Rattler-C V
2
USER MANUAL 29
5. Turn off the device completely, then power it back on. After awhile, the
firmware update process will start automatically. During the update, the screen
will display the inscription “Upgrading...”. The update process will be completed
when the inscription “Upgrading...” goes out.
6. Turn off the device and disconnect it from your PC.
You can also enjoy automatic update function in AGM Connect App (see
section 2.3 for details).
1. Start the AGM Connect App and tap the Settings icon in the left top corner.
2. Tap your device in the device list. The information about your device will
shown.
3. Tap Checking for Upgrade to detect and download the latest FW version.
3.2 TROUBLESHOOTING
Table 3-1 lists the most common malfunctions that may occur with your
equipment. This table does not list all the malfunctions that may occur with
your device. If the equipment malfunction is not corrected by the suggested
actions, or a problem occurs that is not listed in this table, please contact AGM
Global Vision’s Customer Support center or your retailer.
TABLE 3-1. TROUBLESHOOTING
MALFUNCTION CORRECTIVE ACTION
The clip-on fails
to activate.
1. Battery is missing or improperly installed. Insert
battery or install correctly.
2. Battery is dead. Replace the batteries.
3. Battery, surfaces or contacts are dirty or corroded.
Clean the contact.
The
clip-on shut
off sometimes
after shot.
1. Low battery level. Check the remaining capacity of
the batteries, which may be low on power to maintain
performance. Replace the battery.
The image is not
clear.
Perform the sight adjustment referring to section 2.1.
Wi-Fi is not
found.
Examine whether the Wi-Fi function is turned on. If not,
turn on the Wi-Fi hotspot in the menu.
Capturing or
recording fails.
1. The device is connected to your PC and has disabled
the capturing and recording. Disconnect the device.
2. The storage space is full. Delete old files.
3. The device is in a low-battery condition. Replace the
battery.
The PC cannot
identify the
scope.
1. The device is connected to your PC with standard USB
cable. If you use other USB cables, make sure the cable
length is no longer than 1 m.
2. The Wi-Fi function is turned on. If so, turn off the Wi-Fi
hotspot in the menu.
Bekijk gratis de handleiding van AGM Rattler-C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AGM |
| Model | Rattler-C V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3634 MB |
