AGM Anaconda TC50-640 handleiding

24 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 24
9
Anaconda-Micro USER MANUAL
Turn the battery cover knob counterclockwise until stop. The latches from both sides of
the cover will pull out. Replace the battery cover and press it until its clicking position.
(see the Figure 2-1, CLOSE position). Make sure the cover is closed on both sides.
Battery charge level is displayed on the status bar (Figure 2-3)
WARNING:
Do not use rechargeable batteries since their use causes inaccurate battery level
indication and possible disconnection during operation.
NOTE:
Please do not use batteries of different types or batteries with various charge levels.
2.1.3 CLIP-ON INSTALLATION
Use the optional day scope adapter (DSA) to install the Anaconda-Micro onto day
scope lenses.
ATTENTION:
The day scope adapter are not recommended for installing the Anaconda-Micro on
firearms with dynamic recoil (0.308 Win or stronger).
NOTE:
The adapters differ in attaching diameters and must fit with the day scope front lens
diameter. There are three models of adapter: Small, Medium, and Large.
Small adaptor fits objective lenses between 42-50 mm in diameter.
Medium adaptor fits objective lenses between 51-59 mm in diameter.
Large adaptor fits objective lenses between 60-65 mm in diameter.
Install the Anaconda-Micro on the lens of a day scope as follows (refer to Figure 2-4):
1. Screw the day scope adapter (A) onto the Anaconda’s attachment place thread (B).
2. Turn the lever (C) backwards to loosen the adapter clamping device.
3. Slide the Anaconda-Micro with the DSA onto the lens of the day scope as far as it
goes.
4. Turn the nut (D) CW/CCW respectively for adapter’s size adjustment.
5. Affix the DSA to the day scope by locking the lever (C). Verify that the clip-on is firmly
secured to the day scope. If necessary, readjust the clamping device by turning the nut
(D).
FIGURE 2-3. BATTERY STATUS BAR

Bekijk gratis de handleiding van AGM Anaconda TC50-640, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAGM
ModelAnaconda TC50-640
CategorieNiet gecategoriseerd
TaalNederlands
Grootte1875 MB