AGM Anaconda TC50-640 handleiding
Handleiding
Je bekijkt pagina 19 van 24
19
Anaconda-Micro USER MANUAL
6. The setting is saved by pressing EXIT button Up or Down
7. Control if the value is save correctly.
2.3.4 SHUT DOWN OPERATIONS
To prepare the device for storage:
1. Turn the device OFF. Push and hold the operation joystick.
2. Place the protective cover over the objective lens.
3. Disconnect the cable or adapters (if applicable). Place the protective caps over the
connector sockets.
4. Return the scope and any accessories to the case.
2.3.5 MAINTENANCE
1. Gently brush off any dirt from the body of the device using a clean, soft cloth.
2. Moisten the cloth with fresh water and gently wipe down the external surfaces (ex-
cept lenses).
3. Dry any wet surfaces (except lenses) using another dry, clean, soft cloth.
4. Using a lens brush, carefully remove all loose dirt from the lenses.
5. Dampen a cotton swab with ethanol and slowly, gently wipe down the lenses. Clean
the glass surfaces using circular movements, starting from the center of the lens and
moving out towards the edge, without touching the lens holder. Change the cotton
swab after each circular stroke. Repeat this step until the glass surfaces are clean.
2.3.6 PREPARING FOR EXTENDED STORAGE
To prepare the Anaconda-Micro TC50 for extended storage:
1. Remove the batteries.
2. Clean the device and accessories.
3. Place all items into the storage case.
Bekijk gratis de handleiding van AGM Anaconda TC50-640, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AGM |
| Model | Anaconda TC50-640 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1875 MB |
