Handleiding
Je bekijkt pagina 4 van 20
EN EN
7 8
Note: It takes 3 hours or longer to fully charge the built-in battery.
BUTTONS AND LIGHT INDICATORS
Button
Light
Indicator
Function
Power
button
Green
Light on: The printer is powered on but not connected to
Wi-Fi
Slow flashing: Low battery
(charge the printer or it will shut down shortly)
Fast flashing: Battery exhausted
(the printer is shutting down)
Blue
Light on: The printer is connected to Wi Fi
Flashing: No paper installed or out of paper
Paper
advancing
button
Red Light on: The device is charging
PREPARING THE PRINTER
1. Charging the battery
To charge the built-in battery, connect the printer to an external power source with the
provided USB cable. The minimum requirement for charging with a power adaptor* is 5V/1A.
*Not included
2. Installing The Printing Paper
a) Open the paper roll compartment cover.
b) Place the printing paper in its compartment and make sure the thermal sensing side
of the paper is facing towards the printer’s thermal printing sensor as shown in the
illustrations below:
c) Firmly close up the cover.
OBTAINING THE COMPANION APP
This printer supports mobile phones on Android 5.0 or later, and iOS 10.0 or later.
The app can be downloaded by searching “PaperGo” on Google Play and the App Store,
or by scanning the QR codes found on the back of this manual.
Bekijk gratis de handleiding van Agfaphoto Realipix Pocket P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Agfaphoto |
| Model | Realipix Pocket P |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 3307 MB |