Ag Neovo PB3701 handleiding
Handleiding
Je bekijkt pagina 17 van 19
15
APPENDIX
3.4 Troubleshooting
Follow the solutions below to solve these common problems, and contact us if the problem persists.
Symptom Possible Cause Remedy
The Power indicator does not
come on
• The monitor is not powered on. • Check if the power cord is
connected, and switch ON the
monitor.
The Power indicator is on, but
no image is displayed
• The Video wire is detached or
connected improperly.
• No video signal input.
• Connect or replace the video
wire,and ensure proper and
correct connection.
• Check the signal source, and
check if it is properly connected
at the output end.
Image jerking or ripple • There exists an electric device
that interferes with the video
signals.
• Turn off the electric device, or
relocate the monitor.
Dim or extremely bright screen • Low or high brightness/contrast. • Check the brightness/contrast
settings, or restore to default
settings.
Colour difference • Improper chromatic chromatic
saturation.
• Improper RGB values or colour
temperature.
• Check the chromatic saturation.
• Adjust the RGB values or reset
the colour temperature.
• Restore to default settings.
Image distortion • Improper aspect ratio. • Reset the aspect ratio.
Bekijk gratis de handleiding van Ag Neovo PB3701, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ag Neovo |
| Model | PB3701 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1973 MB |