Handleiding
Je bekijkt pagina 18 van 20
18
APPENDIX
4.2 Troubleshooting
Problems Possible Cause and Solution
The power indicator
light is not on
• Check if the power is on.
• Check if the power cord is connected.
Impossible plug-and-play • Check if the function of plug-and-play of the device is compatible with
PC.
• Check if the display card is compatible with the plug-and-play function.
• Check if the signal line 15 pin D-Sub joint bent
Dimming picture • Adjust brightness and contrast.
Flickering picture or
picture with ripples
• There may be electrical appliances or equipment with electronic
disturbance.
The power indicator
light is on (ickering),
but the monitor has no
pictures.
• Check if the PC power is on.
• Check if the PC display card is inserted properly.
• Check if the signal cable of the monitor is correctly connected with the
PC.
• Check the signal cable plug of the monitor and make sure every pin
has no bending.
• Observe the indicator light by pressing the Caps Lock key on the PC
keyboard and check if the PC is working.
Color shortage
(red, green and blue)
• Check the signal cable of the monitor and make sure every pin has no
bending.
Picture with color
difference
(white looks not white)
• Adjust RGB color or reselect color temperature.
Screen font blur under
VGA signal
• Select the “E” to automatically adjust the image.
Screen color error under
VGA signal
• Select “Auto color” in OSD to correct under the white output screen.
Bekijk gratis de handleiding van Ag Neovo MH2703, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ag Neovo |
| Model | MH2703 |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2015 MB |
