Ag Neovo IFP6504P-AO handleiding
Handleiding
Je bekijkt pagina 12 van 74
9
PRECAUTIONS
Notice for the Interactive Display
y In order to maintain the stable luminous performance, it is recommended to use low brightness setting.
y Due to the lifespan of the lamp, it is normal that the brightness quality of the interactive display may
decrease with time.
y When static images are displayed for long periods of time, the image may cause an imprint on the
interactive display. This is called image retention or burn-in.
♦ To prevent image retention, do any of the following:
y Set the interactive display to turn off after a few minutes of being idle.
y Use a screen saver that has moving graphics or a blank white image.
y Switch desktop backgrounds regularly.
y Adjust the interactive display to low brightness settings.
y Turn off the interactive display when the system is not in use.
♦ Things to do when the interactive display shows image retention:
y Turn off the interactive display for extended periods of time. It can be several hours or several days.
y Use a screen saver and run it for extended periods of time.
y Use a black and white image and run it for extended periods of time.
y There are millions of micro transistors inside the interactive display. It is normal for a few transistors to be
damaged and to produce spots. This is acceptable and is not considered a failure.
y IMPORTANT: Always activate a moving screen saver program when you leave your display unattended.
Always activate a periodic screen refresh application if the unit will display unchanging static content.
Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as
“after-imaging” or “ghost imaging”, on your screen. This is a well-known phenomenon in Interactive display
technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually
over a period of time after the power has been switched off.
y WARNING: Severe “burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be
repaired. This is also not covered under the terms of your warranty.
Caring for the Touch Screen
Use the following recommendations to care for the touch screen.
y Before cleaning the screen, make sure the interactive display is switched off and the power cord is
unplugged from the wall outlet.
y Remove dirt or dust from the screen regularly. It is recommended to use a small amount of alcohol as
cleaning agent.
y To avoid damage to the screen, never use any aggressive solvents or scrubbing agents.
y Wipe the screen gently using a lint-free cloth moistened in the cleaning agent.
y Never spray the cleaning agent on the screen surface or the body directly as it may cause short circuit to
the touch screen.
y Do not expose the display to direct sunlight or strong light source during use.
Bekijk gratis de handleiding van Ag Neovo IFP6504P-AO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ag Neovo |
| Model | IFP6504P-AO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9622 MB |
