AFX HYBRID-360LED-FC handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 8 van 32
EN 8
© COPYRIGHT LOTRONIC 2023
In the event of a serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use the same type of
spare parts.
Make sure the power cord is never crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source while it is on as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!.
The product is for decorative purposes only and not suitable as a household room illumination.
If the external exible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualied person in order to avoid a hazard.
The lenses, housing or ultraviolet lter must be replaced if they are visibly damaged.
The light source of this device is not replaceable. If it is defective, the entire unit must be discard-
ed.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
FEATURES
1x 360W white LED lamp
22/20 DMX channels USITT DMX-512
ArtNet
1 rotating gobo wheel with 2 rotating glass gobos, 5 metal gobos + Open, with speed adjust-
ment, stream effect, dithering effect, left/right rotation and gobo indexing
1 static gobo wheel with 11 gobos + Open
1 colour wheel with 10 colours + Open
Gobo overlay (gobo morphing)
Frost lter
Totem mode
DMX, master-slave, sound activated or auto operation (8 built-in programs)
Electric focus from 2.5 – 15m
Linear motorized zoom with 3.5-48° beam angle
Linear CMY + CTO
25x/sec shutter/strobe with speed control
0-100% linear LED dimmer
3-facet prism, 5-facet prism and frost lter with variable speed & direction
Preset variable/random strobe and dimming pulse effect
2.8” TFT LCD touch display (320 x 240px) with 4 buttons
Improved optics and at beam eld
Variable direction rainbow effect with speed adjustment
Fan cooling system with constant temperature readout and management function
Powercon IN/OUT connectors
3-pin XLR IN/OUT connectors
RJ45 IN/OUT connectors for ArtNet
IP20 protection rating
2x ¼ turn fastening Omega clamps
Safety attachment point
FUSE REPLACEMENT
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
With a screwdriver wedge the fuse holder out of its housing.
Remove the damaged fuse from its holder and replace with exactly the same type of fuse.
Insert the fuse holder back in its place and reconnect power.
Warning: If after replacing the fuse you continue to blow fuses, STOP using the unit. Contact cus-
tomer support for further instructions. Continuing to use the unit may cause serious damage.

Bekijk gratis de handleiding van AFX HYBRID-360LED-FC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkAFX
ModelHYBRID-360LED-FC
CategorieVerlichting
TaalNederlands
Grootte4270 MB