AFX CLUB-KALEDO handleiding
Handleiding
Je bekijkt pagina 3 van 24
EN3
www.afx-light.com
down before replacing or servicing.
• DO NOT OPEN the unit within 5 minutes after switching off.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair
the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center. Always use the same type of
spare parts.
• Make sure the power cord is never crimped or damaged.
• Avoid direct eye exposure to the light source while it is on as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!.
• The product is for decorative purposes only and not suitable as a household room illumination.
• If the external exible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualied person in order to avoid a hazard.
• The lenses, housing or ultraviolet lter must be replaced if they are visibly damaged.
• Please note that the lamp of this device cannot be replaced. If the lamp is faulty, the unit must
be discarded
DISCONNECT DEVICE
Please note that the unit DOES NOT have an ON/OFF switch. Please unplug the unit to remove
completele the power from the internal circuits before cleaning or servicing. Therefore, the discon-
nect device shall remain readily accessible.
INSTALLATION
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is rmly
xed to avoid vibration and slipping while operating. Always ensure that the structure to which you
are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate
safety rope.
Never stand directly below the device when mounting, removing or servicing the xture.
POWER SUPPLY AND SIGNAL CABLE CONNECTION
1. Mains Power connection
The exclusive plug should be used between the connection of unit and power. Please ensure that the
rated voltage and frequency are accordance with the power supply. The required input voltage and
frequency are: 90-240V~ 50/60Hz
We suggest that every light has an independent switch so that you can turn on or turn off the light
randomly.
Note: the ground wire (yellow/green double-colour wire) must be safely connected, the electrical installation must be in accordance with the
related standards
CAUTION: When installing the device, make sure there is no highly inammable material within a
distance of min.5m!
12
3
Ground
Signal (+)
Signal (-)
Signal (+)
Signal (-)
12
3
120
DMX512 IN DMX512 OUT
DMX IN
POWER IN
Bekijk gratis de handleiding van AFX CLUB-KALEDO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AFX |
| Model | CLUB-KALEDO |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4315 MB |
