Handleiding
Je bekijkt pagina 19 van 72
off and the machine gives an acoustic
error signal. Then previously selected
programme is restored.
5. Touch Avvio/Pausa button to begin
drying process.
When SyncDry programme is set, user
is still allowed to change options or select
another programme by rotating knob or
using APP. In such cases SyncDry
button LED will turn off to indicate that
the programme is not anymore the
suggested one; SyncDry automatic
programme can be selected again by
pressing related button until data is
available on Cloud.
9. SETTINGS
9.1 Deactivating the water container
indicator
The water container indicator is activated by
default. It illuminates at the end of the drying
cycle or during the cycle if the water reservoir
is full. If the draining kit is installed the water
container is drained automatically and the
indicator can be deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available programmes.
3. Touch and hold down Silent and Fine
buttons at the same time.
The water container indicator: is off and
the symbol appears - the water
container indicator is permanently
deactivated
To activate the water container indicator
back, follow the above procedure again.
The water container indicator: is on
and the symbol appears - the
water container indicator is permanently
activated
9.2 Operating hours counter
This function gives a possibility to display the
total operating time of the appliance in hours,
which is counted from the moment it is first
switched on. The actual operating time of the
cycles is shown (does not include pauses or
delayed start time).
To visualise this value, proceed as follows:
1. Switch the appliance on by pressing the
On/Off button.
2. Press and hold the Asciugatura a
Tempo and Livello Asciugatura buttons
for some seconds.
3. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. if the operating time is 1276 hours,
the display shows the text Hr for 2
seconds then 12 for 2 seconds followed
by 76. This value is displayed with a
sequence of two digits at a time: the first
two digits indicate thousands and
hundreds, the second two digits indicate
tens and units.
To exit this mode, either press any button,
turn the selector knob or switch the appliance
off.
9.3 Factory Defaults
This function allows to restore the factory
default settings. The saved options and
working modes will be reset. It will also
remove WiFi network credentials from the
appliance memory and reset personalized
programme settings, including favourite
programmes.
To activate this option follow steps below:
ENGLISH 19
Bekijk gratis de handleiding van AEG TR9HH8BY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | TR9HH8BY |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 6531 MB |
