Handleiding
Je bekijkt pagina 12 van 72
The Wi-Fi functionality is off as factory default
setting.
To connect the appliance to enjoy the full
range of features and services you need:
• Wireless network at home with internet
connection enabled.
• Mobile device connected to wireless
network.
Frequency 2.412 - 2.472 GHz for European
market
Protocol IEEE 802.11b/g/n
Max power < 20dBm
Encryption WPA, WPA2, WPA3
6.1 QR code on rating plate
00000000
00A
Mod.
xxxxxxxxx
000V ~ 00Hz 0000 W
910000000
00
Prod.No.
SCANNING...
QR code can be used in two ways:
• Scan the QR code with the built-in camera
app to download our app from the App
store on your smart device and follow the
required steps.
• Pairing your smart device with appliance
to simplify the process. Scan the QR code
with QR code scanner built-in our app.
6.2 Installing our app
When connecting the tumble dryer to the
application, stand near it with Your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart device
or scan QR code (
see chapter "QR code
on rating plate"
).
2. Download and install our app.
3. Start the application. Select the country
and language and login with Your email
and password. If you do not have an
account, create a new one following the
instructions in our app.
6.3 Wireless connection
configuration
Before you begin the configuration download
and install our app on your smart device.
1. Push the On/Off button to switch on the
appliance.
2. Wait approximately 8 seconds.
3. Press and hold the Partenza da remoto
button for around 3 seconds until you
hear a single 'click' sound.
The symbols: and appear on the
display. After few seconds only flashing
symbol: remains. Appliance is starting up
the connection, it takes around 10 seconds
for the wireless module to activate. When
ready the symbol: (Access Point)
appears on the display. Access Point is
open for around 5 minutes.
4. Configure our app on your smart device
and follow the on screen instructions to
connect the appliance to your WiFi
network.
5. If the connection is established,
symbol is off and the WiFi icon stays
lit steadily.
Each time you switch the appliance on,
the appliance attempts to connect to the
network automatically. When the
connection is established the symbol:
stops flashing.
To switch off the wireless connection,
touch and hold down Partenza da remoto
button until you hear a single 'click' sound.
The symbol: appears on the display.
12 ENGLISH
Bekijk gratis de handleiding van AEG TR9HH8BY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | TR9HH8BY |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 6531 MB |
