Handleiding
Je bekijkt pagina 13 van 36
The Remote Control activates
automatically when you press the Start/
Pause button to start the programme, but
it is also possible to start a drying
programme remotely.
Remote Start
A quick touch of this button activates the
Remote Start function that allows you to start,
pause and stop the appliance remotely.
The related led comes on and the related
icon appears on display.
If you set a programme via App and it
does not match with the knob position,
text appears alternating with
programme duration.
Press and hold this button for longer time to
provide two other functions:
• hold it down for 3 seconds as long as a
click sounds: the Wi-Fi is turned on and
off.
• hold it down for 10 seconds as long as a
double beep sounds and appears on
the display: to reset the Network
Credentials.
6.4 Wireless connection
configuration
Before you begin the configuration download
and install our app on your smart device.
1. Push the On/Off button to switch on the
appliance.
2. Wait approximately 8 seconds.
3. Press and hold the Remote Start button
for around 3 seconds until you hear a
single 'click' sound.
The symbols:
and appear on the
display. After few seconds only flashing
symbol: remains. Appliance is starting up
the connection, it takes around 10 seconds
for the wireless module to activate. When
ready the symbol:
(Access Point)
appears on the display. Access Point is
open for around 5 minutes.
4. Configure our app on your smart device
and follow the on screen instructions to
connect the appliance to your WiFi
network.
5. If the connection is established,
symbol is off and the WiFi icon stays
lit steadily.
Each time you switch the appliance on,
the appliance attempts to connect to the
network automatically. When the
connection is established the symbol:
stops flashing.
To switch off the wireless connection,
touch and hold down Remote Start button
until you hear a single 'click' sound. The
symbol: appears on the display.
Appliance stores last connection
configuration. To use wireless features of
the appliance the wireless connection
must be in mode.
To remove the wireless credentials, touch
and hold down Remote Start button for
around 10 seconds until you hear 2 'beeps'
sound. The symbol: appears on
the display.
6.5 Over-the-air update
WARNING!
During the update it is highly
recommended to not turn off or unplug
the appliance.
The App may propose an update for
downloading new features.
The update is accepted via App only.
If a programme is running, the App notifies
that the update will start at the end of the
programme.
During the update, the appliance shows
in the display.
ENGLISH 13
Bekijk gratis de handleiding van AEG TR959V6BC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | TR959V6BC |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3263 MB |
