Handleiding
Je bekijkt pagina 22 van 60
12.4 Emptying the water container
Empty the condensed water container after
each drying cycle.
If the condensed water container is full, the
programme stops automatically. The
tanica
symbol comes on the display and you
must empty the water container.
To empty the water container:
1. Pull the water container out keeping it in a
horizontal position.
2. Pull the plastic connection out and drain
the water into a basin or equivalent
receptacle.
3. Push the plastic connection back in and
place the water container back into
position.
4. To continue the programme press the
Avvio/Pausa button.
12.5 Cleaning the condenser
If the symbol
condensatore
flashes on the
display, inspect the condenser and its
compartment. If it is dirty, clean it. Do the
check not less than once a 6 months.
WARNING!
Do not touch the metal surface with bare
hands. Risk of injury. Wear protective
gloves. Clean carefully to avoid
damaging the metal surface.
CAUTION!
Do not use hard attachment on vacuum
cleaner to remove the fluff from the
condenser. This may damage the ribs of
the condenser, what leads to the lower
performance of the appliance and longer
drying time.
To inspect:
1. Open the door. Pull the filter up.
2. Open the condenser cover.
3. Turn the levers to unlock the condenser
lid.
22 ENGLISH
Bekijk gratis de handleiding van AEG TR8HGAM8B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | TR8HGAM8B |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5206 MB |
