Handleiding
Je bekijkt pagina 19 van 60
programme dial (this option does not lock the
On/Off button).
You can activate the child lock option:
• before you touch the Avvio/Pausa button
- the appliance cannot start
• after you touch the Avvio/Pausa button -
programmes and option selection is
unavailable.
Child lock option activation:
3s
1. Turn the dryer on.
2. Select 1 of the available programmes.
3. Touch and hold down Antipiega button
by around 3 seconds.
The symbol appears on the display.
4. To deactivate the child lock, touch the
above button again until the symbol
disappears.
10.8 Starting a programme
To start the programme:
Touch the Avvio/Pausa button.
The appliance starts and the LED above the
button stops flashing and stays on.
10.9 Starting a program with
Partenza Ritardata
1. Set the drying program and options.
2. Touch Partenza Ritardata button again
and again.
Time of delay is on the display (e.g.
if the program has to start after 12 hours.)
3. To activate Partenza Ritardata option,
touch the Avvio/Pausa button.
Time to start decreases on the display.
10.10 Programme change
To change a programme:
1. Push the On/Off button to turn the
appliance off.
2. Push the On/Off button again to turn on
the appliance.
3. Set a new programme.
10.11 Programme end
Clean the filter and drain the water
container after each drying cycle. (See
chapter CARE AND CLEANING.)
If the drying cycle is finished, the symbol
appears on the display. If the Segnale
acustico option is activated, the acoustic
signal sounds intermittently for 1 minute.
If you do not turn off the appliance, the
anti-crease phase starts (not active with
all programmes). Flashing symbol
signals the execution of the anti-crease
phase. Laundry can be removed during
this phase.
To remove the laundry:
1. Push the On/Off button for 2 seconds to
turn the appliance off.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Possible causes of unsatisfactory drying
results:
• Inadequate default dryness level settings.
See chapter
Adjustment of the target final
moisture
• Room temperature is too low or too high.
Optimal room temperature is between
18°-25°C.
ENGLISH 19
Bekijk gratis de handleiding van AEG TR8HGAM8B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | AEG |
| Model | TR8HGAM8B |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5206 MB |
