Handleiding
Je bekijkt pagina 15 van 32

Adjustment of the target final moisture
This may be necessary since the dryness
results are impacted by many conditions,
e.g. the water type, the supply voltage or
the ambient temperature etc.
HOW TO ACHIEVE A PERFECT DRYING:
1. Try to adjust the dryness level options (see
Dry‐
ness Level
option above).
2. If you want to further increase the laundry dry‐
ness results, you can modify the default dryness
setting (see below). This adjustment will act on
most programmes, except Eco, Wool, Duvet,
Down Jacket, Refresh programmes if available
on the machine.
To change the default degree of target final
moisture:
1. Turn the appliance on.
2. Select 1 of the available programmes.
3. Touch and hold down the Dryness Level
and + Anti Crease buttons at the same
time.
One of the symbols appears on the display:
- Maximum dryness
- Extra dryness
- Standard dryness
4. Touch the Start/Pause button repeatedly
until you reach the desired target final
moisture .
Dryness level Display symbol
maximum dry‐
ness
more dry laun‐
dry
standard dry
laundry
5. To memorise the setting touch and hold
down the Dryness Level and + Anti
Crease buttons at the same time for
approximately 2 seconds.
7.2 + Anti Crease
Extends up to 120 minutes the anti-crease
phase (30 minutes) at the end of the drying
cycle. After drying phase drum rotates from
time to time to prevent creases. Laundry can
be removed during the anti-crease phase.
7.3 Buzzer
The acoustic signal sounds at the following:
• cycle end
• start and end of crease guard phase
The acoustic signal is by default always on.
You can use this option to activate or
deactivate the sound.
7.4 Time Dry
For: Cottons, BedlinenXL, Synthetics and
MixDry programmes. Lets the user to set
drying time from minimum 10 min to
maximum of 2 hours (in 10 min steps). When
this option is maximum, load indicator
disappears.
The cycle lasts as long as set drying time
regardless of the size of a load and its
dryness.
TIME DRYING RECOMMENDATION
up 10 min action of cool air only (no heater).
10 - 40
min
additional drying to improve dryness af‐
ter previous drying cycle.
> 40 min
full drying of the small laundry loads up
to 4 kg, well spun (>1200 rpm).
7.5 Delay Start
Lets to delay the start of a drying
program from minimum of 30 minutes to
maximum of 20 hours.
ENGLISH 15
Bekijk gratis de handleiding van AEG TR718A4B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | AEG |
Model | TR718A4B |
Categorie | Wasdroger |
Taal | Nederlands |
Grootte | 2463 MB |